Star San 1 gallon

Star San 1 gallon
På lager
kr 562,50
kr 625,00


Star San 3,78 liter

A high foaming, final acid anionic rinse for use in the beverage and food industries.

Leaves tanks and equipment spotless and avoids mineral build-up Not affected by organic soils Only 60 sec. contact time needed! Do not use on soft metals nor in CIP systems

Dosage: 15 - 25 ml / 10 litres of water User manual in Norwegian & Swedish

Directions for use: use as a final rinse. Prior to application; remove gross food particles nd soil by pre-flush or pre-scrape and, when necessary, pre-soak. Then thoroughly wash or flush objects with a good detergent, followed by potable water. Prepare a solution of 15 - 25 ml Star San HBTM per 10 L of water ( 1 oz/5 gal to 1 oz/3 gal). Apply on surface with a cloth, mop, sponge, spray or by immersion. Spray 15-20 cm (6-8 inches) from surface and rub with a brush, cloth or sponge (cover or remove all food products). The surface must remain wet for at least 1 minute. Let air dry afterwards. Close the packaging tightly after use and store in a well-ventilated place.

Keep out of reach of children

. DO NOT MIX STAR SAN HBTM with chlorinated cleaners as chlorine gas will result.